For angles greater or less than 90 degrees, we highly recommend you purchase our vinyl angle helper kits. These kits are designed to fit into the channels of our posts and convert the grooved post into a flat surface. Once the Angle Helper Kit is installed, the end of the rail can then be cut at the angle you need for your project and attached to the new flat side of the post.

You can install the fence at an angle without the kits and the following will show you how. However, be forewarned that cutting the vinyl in this way isn’t easy.

 

 

A. Mark angle and post channel corner to cut on top and bottom rail according to your fence angle.

B. Cut on marked lines previously made on both top and bottom rails.

C. Insert wood into the end of the rail. This will create a strong connection between the rail and the post because your screw will have more to bite into other than one vertical wall surface on your rail.